Details
GENERAL DESCRIPTION
bmSOLUTION® WPA 1530 is a high efficiency polyelectrolytes for water treatment. These flocculants are organic, water soluble, high molecular weight, highly charged anionic flocculants polymers. bmSOLUTION® WPA 1530 is usually used as a coagulant aid for sedimentation or floatation of suspended solids in industrial water. It is effective in treatment of wastewater from dyeing, leather, food, paper industry and treatment of muddy water and seawater.
TYPICAL PRODUCT PROPERTIES
Appearance : White Granular Powder
pH (0.1% solution) : 5.5 – 8.0
Ionic Degree : High
APPLICATION
bmSOLUTION® WPA 1530 are generally prepared as a 0.1% (1g/l) solution prior to dosing into the systems. Care should be taken whilst preparing the solutions as high shear mixing at the mixing point must be used in order to ensure powders are proper dissolve.
DOSAGE AND CONTROL
Typical dosage depends on the nature of the substrate being treated but generally ranges from 0.1- 3ppm. Our representative will provide you with proper control requirements for your specific application.
HANDLING PROCEDURE
Wear safety face shields or goggles, rubber gloves, long pants and long sleeve shirt when handling. Please refer Safety Data Sheets for details on health and safety information.
PACKAGING
bmSOLUTION® WPA 1530 is available in 25kg bag.
bmSOLUTION® WPA 1530 is a high efficiency polyelectrolytes for water treatment. These flocculants are organic, water soluble, high molecular weight, highly charged anionic flocculants polymers. bmSOLUTION® WPA 1530 is usually used as a coagulant aid for sedimentation or floatation of suspended solids in industrial water. It is effective in treatment of wastewater from dyeing, leather, food, paper industry and treatment of muddy water and seawater.
TYPICAL PRODUCT PROPERTIES
Appearance : White Granular Powder
pH (0.1% solution) : 5.5 – 8.0
Ionic Degree : High
APPLICATION
bmSOLUTION® WPA 1530 are generally prepared as a 0.1% (1g/l) solution prior to dosing into the systems. Care should be taken whilst preparing the solutions as high shear mixing at the mixing point must be used in order to ensure powders are proper dissolve.
DOSAGE AND CONTROL
Typical dosage depends on the nature of the substrate being treated but generally ranges from 0.1- 3ppm. Our representative will provide you with proper control requirements for your specific application.
HANDLING PROCEDURE
Wear safety face shields or goggles, rubber gloves, long pants and long sleeve shirt when handling. Please refer Safety Data Sheets for details on health and safety information.
PACKAGING
bmSOLUTION® WPA 1530 is available in 25kg bag.
View more about WPA 1530 Anionic Flocculant on main site